Buy Hardwood Point Presser Clapper [2-in-1] tool, By SEDSG for pressing garment  and have it delivered at your atelier doorstep!

This is an invaluable piece of equipment to add to your sewing and tailoring armory. The top, with it’s narrow pointed surface, enables you to press hard to reach areas such as lapels ,collar points and cuffs. Simply place your seam wrong side up,  apply plenty of steam to your seam and the hardwood surface will absorb the steam thus giving a crisp finish to your garment.

This garment presser tool base is called the clapper and is used to set seams, creases, pleats and to flatten bulky seams.  To use, apply plenty of steam to the seam then press firmly with the clapper, holding in place until the seam has cooled. Likewise, it will produce perfect edges to collars, jacket fronts, necklines etc when used on the right side of the garment. We would recommend using a good quality fine cotton or silk organza pressing cloth to prevent shine.

Handle length 28 cm
Overall height 10 cm
Wood – Beech

this 2 in 1 Point Presser Clapper is Wide application pressing tool for laundry, garment shops, designers, seamstresses etc…

How to use Hardwood Point Presser Clapper by SEDSG?

This essential tool combines the clapper with a narrow edge to use for pressing seams and corners open. .

Use Clapper to flatten bulky facing/collar edges, seams, pleats, and darts.

Use Point Presser section for pressing narrow, hard to reach areas of collars, belts, cuffs, corners, points, etc.

Wood: Poplar

Measurements: The point presser is about 11″ long and 3/4″ wide, the clapper is 9 1/2″ long, 3″ wide at one end and 2″ wide at the other end, and the height of the entire piece sis 4″ high.

Due to manual measurement error, allow slight difference in inch

Buy  this garment pressing tool By SEDSG and have it delivered nationwide !